Jual Clamp Meter Fluke 355

Jual  Fluke 355


TOKO MARGA SETIA SURVEY
Berdagang alat- alat Kelautan, Alat Selam, Perahu Karet,Alat Keselamatan,
GPS Garmin, GPS Magellan, Alat Survey, Alat Ukur dan Aksesoris Alat Ukur.
Current Meter.Anemometer ,Anemometer Wireless,Weather station
Untuk keterangan, nego harga dan informasi produk lainnya, hubungi :
Name       : tatang survey
Alamat      : Jl .H.Kelik No.20 RT.03 / RW.08 Kelapa Dua Kebon Jeruk Jakarta Barat
Email        : tatangms409@gmail.com
Telp          : 082124100046
WhatsApp  :082124100046
www.margasetiaonleneshoop.com

Versatile and rugged tools for applications with high currents

Confidently take reliable readings with the True-rms, Fluke 355 and 353 digital clamp meters; the tools of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. The extra rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when taking high-powered measurements.
Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this an ideal clamp meter for utilities, electrical contractors and industrial service technicians.
  • Reliably handle a wide range of high-current applications with 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc
  • The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
  • CAT IV 600 V, CAT III 1000 V rating for added user protection
  • In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability
  • High voltage measurement of 1000 V ac + dc true-rms, 600 V ac, and 1000 V dc allows the user to perform multiple tests with only one tool (355 only)
  • Resistance to 400K ohms coupled with a continuity beeper provide the convenience of a multimeter in a clamp meter. (355 only)
  • Accurately measure frequency up to 1 kHz for optimum troubleshooting
  • Quickly analyze readings using the MIN, MAX, and AVG functions
  • A large backlit display allows for easy visibility in low-lit areas
  • Use the display hold feature to capture readings even when the display cannot be viewed
  • Use the low-pass filter to smooth out noisy loads and stabilize readings
  • *Add 2 % to error spec for CF > 2
    General specifications
    Batteries

    Six 1.5 V AA NEDA 15 A or IEC LR6
    Battery life (with typical usage, backlight off)

    100 hours
    Test leads

    Rated to 1000 V
    Weight

    .814 kg (1.8 lb)
    Jaw size

    58 mm (2.28 in)
    Dimensions (LxWxD)

    300 mm x 98 mm x 52 mm (12 in x 3.75 in x 2 in)
    Safety rating

    IEC 61010-2-032, 600 V CAT IV, 1000 V CAT III
    [/tab]
    Environmental specifications
    Operating temperature

    32 °F to + 122 °F (0 °C to +50 °C)
    Storage temperature

    -4 °F to 140 °F (-20 °C to +60 °C)
    Operating humidity

    0 to 95 % (non-condensing)
    Operating altitude

    2000 m
    Storage altitude

    10,000 m
    IP rating

    42 (indoor use only)
    Drop test requirements

    1 m
    EMI, RFI, EMC

    FCC part 15, IEC/EN 61326-1:1997 class B, IEC/EN 61326:1997 3V/m, performance criteria B, EN61325
    Temperature coefficients
    Current: 0.1 % of reading per °C outside 22 °C to 24 °C
    Voltage: 0.1 % of reading per °C outside 22 °C to 24 °C
    Electrical specifications
    Current measurement dc and ac 10 Hz to 100 Hz
    Range : 40 A Resolution: 10 mA Accuracy, A: 1.5 % rdg + 15 digits Trigger Level for Inrush: 0.50 A Trigger Level for Hz Filter OFF: 2.50 A Trigger Level for Hz Filter ON: 0.50 A
    Range : 400 A Resolution: 100 mA Accuracy, A: 1.5 % rdg + 5 digits Trigger Level for Inrush: 5.0 A Trigger Level for Hz Filter OFF: 2.5 A Trigger Level for Hz Filter ON: 2.5 A
    Range : 2000 A; 1400 ac rms Resolution: 1 A Accuracy, A: 1.5 % rdg + 5 digits Trigger Level for Inrush: 5 A Trigger Level for Hz Filter OFF: 8 A Trigger Level for Hz Filter ON: 8 A
    Crest Factor (50/60 Hz)
    Range : 40 A Crest Factor* : 2 @ 33 A, 2.4 @ 27 A
    Range : 400 A Crest Factor* : 2 @ 330 A, 2.4 @ 270 A
    Range : 2000 A; 1400 ac rms Crest Factor* : 2 @ 1000 A, 2.4 @ 833 A
    Current measurement ac 100.1 Hz to 1 kHz
    Range : 40 A Resolution: 10 mA Accuracy > 10 A : 3.5 % rdg + 15 digits Trigger Level for Inrush: 0.50 A Trigger Level for Hz Filter OFF : 2.50 A Trigger Level for Hz Filter ON : 0.50 A
    Range : 400 A Resolution: 100 mA Accuracy > 10 A : 3.5 % rdg + 5 digits Trigger Level for Inrush: 5.0 A Trigger Level for Hz Filter OFF : 2.5 A Trigger Level for Hz Filter ON : 2.5 A
    Range : 2000 A; 1400 ac rms Resolution: 1 A Accuracy > 10 A : 3.5 % rdg + 5 digits Trigger Level for Inrush: 5 A Trigger Level for Hz Filter OFF : 8 A Trigger Level for Hz Filter ON : 8 A
    Voltage measurement (355 only) dc and ac 10 Hz to 100 Hz (600 V and 1000 V ranges have 10 % over range to 660 V and 1100 V respectively.)
    Range : 4 V Resolution: 1 mV Accuracy: 1 % rdg + 10 digits Trigger Level for Hz Filter OFF: 0.050 V Trigger Level for Hz Filter ON: 0.050 V
    Range : 40 V Resolution: 10 mV Accuracy: 1 % rdg + 5 digits Trigger Level for Hz Filter OFF: 0.25 V Trigger Level for Hz Filter ON: 0.25 V
    Range : 400 V Resolution: 100 mV Accuracy: 1 % rdg + 5 digits Trigger Level for Hz Filter OFF: 6 V Trigger Level for Hz Filter ON: 6 V
    Range : 600 V ac rms Resolution: 1 V Accuracy: 1 % rdg + 5 digits Trigger Level for Hz Filter OFF: 6 V Trigger Level for Hz Filter ON: 6 V
    Range : 1000 V dc Resolution: 1 V Accuracy: 1 % rdg + 5 digits
    Voltage measurement (355 only) ac 100.1 Hz to 1 kHz (600 V and 1000 V ranges have 10 % over range to 660 V and 1100 V respectively.)
    Range: 4 V Resolution: 1 mV Accuracy: 3 % rdg + 10 digits Trigger Level for Hz Filter OFF: 0.050 V Trigger Level for Hz Filter ON: 0.050 V
    Range: 40 V Resolution: 10 mV Accuracy: 3 % rdg + 5 digits Trigger Level for Hz Filter OFF: 0.25 V Trigger Level for Hz Filter ON: 0.25 V
    Range: 400 V Resolution: 100 mV Accuracy: 3 % rdg + 5 digits Trigger Level for Hz Filter OFF: 6 V Trigger Level for Hz Filter ON: 6 V
    Range: 600 V ac rms Resolution: 1 V Accuracy: 3 % rdg + 5 digits Trigger Level for Hz Filter OFF: 6 V Trigger Level for Hz Filter ON: 6 V
    Ohms measurement (355 only)
    Range: 400 Ω Resolution: 0.1 Ω Accuracy: 1.5 % + 5 digits
    Range: 4 kΩ Resolution: 1 Ω Accuracy: 1.5 % + 5 digits
    Range: 40 kΩ Resolution: 10 Ω Accuracy: 1.5 % + 5 digits
    Range: 400 kΩ Resolution: 100 Ω Accuracy: 1.5 % + 5 digits
    Continuity beeper (355 only)

    On at ≤ 30 Ω

    Off at ≥ 100 Ω
    Frequency measurement
    Measurement range 5.0 Hz to 1 kHz
    Resolution 0.1 Hz (15 Hz to 399.9 Hz); 1 Hz (400 Hz to 1 kHz)
    Accuracy – 5.0 Hz to 100 Hz 0.2 % + 2 counts
    Accuracy – 100.1 Hz to 1 kHz 0.5 % + 5 counts
    Trigger level Refer to current and voltage tables
     

Related product you might see:

Share this product :

Post a Comment

 
Copyright © 2011. Tatang Survey Shoop - All Rights Reserved
Template by Creating Website | Re-designed by : Template Toko Online